| Nicole Hannah's over under ring |
My take on the over under ring
|
My version after LOS
|
Sunday, September 09, 2012
Another Wire Wrapped Cab Ring
Normally, I'm pretty good at staring at a piece of wire jewelry and figuring out for the most part how it is made. Nicole Hannah's Over Under Ring, however, had me stumped. Wires were coming from where there should have been no more wires left to use and the stone in her picture looks like it could fall right out the top (though I'm sure that's not the case). I broke down and bought her great tutorial, broke out my copper wire and gave it a go. I ended up making my intitial loops too small, quickly ran out of places to tuck all my wires and had to improvise to finish of the ring. I really like how it turned out though even though it doesn't have as many wraps around the stone as the original. I then LOS'd the ring to give it even more depth and texture. Sadly it is too big for my tiny fingers and so I have decided to sell it. You can find it in the jewelry shop if you'd like to have it for your very own.
Thursday, September 06, 2012
My Jewelry Supply Black Hole
I have a secret to share. I have a really bad habit of buying supplies that catch my eye, organising them into my many many boxes of beads and baubles and then doing nothing with them. Kind of like a black hole... for jewelry supplies. Months ago I got a bulk order of stone cabochons. They were and still are beautiful, and yet until two days ago I hadn't made anything with them.
Lately I've been trying to challenge myself. For me this is wire wrapped rings. They don't have an obvious beginning or end which my brain sometimes finds hard to incorporate into a design. Having had some success using beads as a focal point I now set myself the challenge of coming up with a design that would set a stone in place. No glue - that's cheating! Just wire carefully wrapped to hold everything in place.
I ended up choosing a 10mm round labradorite cab for this project. In my head my original thoughts were for a more angular design with corners above and below the stone. However, when I got to wrapping the stone into place, the wire bundle just seems to flow so nicely around it that I had to go with it. Here it is. My first wire wrapped ring with a stone setting.
I had to wear it around for an entire day before I had convinced myself that the stone would actually stay in place. Not because it felt loose or there were physical signs of it doing so, just because I couldn't believe my first attempt had been successful and actually looked good too! I've decided to put this ring up for sale. Though I enjoy making them, I'm not not a big ring wearer. (Wearer? I don't think that's an actual word, but I'm adding it to my personal dictionary). Hopefully someone will get as much enjoyment out of wearing it as I did out of making. I've also made a tutorial on how to make on of your very own if you're of the craftier persuasion which you can find in the tutorial shop. I'm going to have to make a dent in my collection of stone cabs now and actually put them to good use.
Lately I've been trying to challenge myself. For me this is wire wrapped rings. They don't have an obvious beginning or end which my brain sometimes finds hard to incorporate into a design. Having had some success using beads as a focal point I now set myself the challenge of coming up with a design that would set a stone in place. No glue - that's cheating! Just wire carefully wrapped to hold everything in place.
I ended up choosing a 10mm round labradorite cab for this project. In my head my original thoughts were for a more angular design with corners above and below the stone. However, when I got to wrapping the stone into place, the wire bundle just seems to flow so nicely around it that I had to go with it. Here it is. My first wire wrapped ring with a stone setting.
I had to wear it around for an entire day before I had convinced myself that the stone would actually stay in place. Not because it felt loose or there were physical signs of it doing so, just because I couldn't believe my first attempt had been successful and actually looked good too! I've decided to put this ring up for sale. Though I enjoy making them, I'm not not a big ring wearer. (Wearer? I don't think that's an actual word, but I'm adding it to my personal dictionary). Hopefully someone will get as much enjoyment out of wearing it as I did out of making. I've also made a tutorial on how to make on of your very own if you're of the craftier persuasion which you can find in the tutorial shop. I'm going to have to make a dent in my collection of stone cabs now and actually put them to good use.
Monday, September 03, 2012
Sparkle, Shimmer and Shine with Sweetdelight.ca
Guess what! I've been invited to participate in sweetdelight.ca's September 2012 sample box promotion. The theme is Sparkle, Shimmer and Shine, so my jewelry fits right in. How it works. I send in a whole bunch of jewelry pieces to the Sweet Delight team. You can then go to http://www.sweetdelight.ca/buythebox.html and buy a sample box for a grand total of $26 including shipping and handling. What a steal! You then get a box mailed to you filled with samples and full size products from a variety of businesses focusing on bath, beauty and style worth way more than $26. I know I would sell some of my pieces for that amount or more just by themself. Here's a sneak peak of some of the pieces that I sent.
![]() |
![]() |
![]() |
![]() |
![]() |
Wednesday, August 22, 2012
Wire Wrapped Copper Earrings
I don't usually use copper in my jewelry. However, I was inspired by Taniri's Helen Earrings to give it a try because the oxidation makes it look dark and rich rather than....orange. I used 18 gauge round wire for the structure and wrapped those with 24 gauge round wire. I usually use thinner wire for fine wrapping, however, I needed to get these done fast because I was making them to wear to a wedding this weekend and thus didn't have time to wait for a wire order to show up in the mail. I used the hard boiled egg method for the initial oxidization and have ordered some liver of sulfur to make them even darker. The beads are 4mm amethyst AB crystal bicones. These have great texture to them, which I love. Maybe I'll have to work with copper more often.
| The Inspiration | My Interpretation |
Monday, August 13, 2012
Wire Wrapped Bow Ring
You know that old saying that if you need to remember something, tie a string around your finger? I don't think anybody wants an ugly little string on their finger all day but a cute little bow ring is a different story. I've had this idea for a while, but couldn't quite figure out how to 'tie' the bow. My first attempt was an absolute disaster and sent me back to the drawing board. I had to get my mind out of the rut of how you tie a traditional bow, since wires don't like to bed that way, let alone a bundle of wires already wrapped together. I came up with a nifty solution that let to this super cute ring. It is made with 24 gauge round and 30 gauge round dead soft sterling silver wire. If you want to learn the secret to tying this bow you can check out the tutorial in my tutorial shop.
Thursday, August 09, 2012
Don't Give Up If Your Original Plan Fails
In my mind I had this idea of a bead surrounded by fine wire weaving that would join together to form a four stranded braid above the bead up to the ear wire. I wanted to take the 4 woven sections and then weave them together like the pattern on the right. However, they didn't want to cooperate and ended up being too stiff to get all the intricate bending needed.
I was frustrated, but I had just spent 2 hours doing all this fine wire weaving so I wasn't about to throw away all my effort (or all that sterling silver wire). I did me best to straighten out the 4 woven sections and then just started to play with them and join them together in a way that the wires wanted to go. The result was a beautiful teardrop shape. I love the gentle curves of these earrings. They're just so elegant! If you like these as much as I do, you can buy the tutorial to make them yourself in the Tutorial Shop. If you'd like a pair but don't want to make them yourself, please feel free to contact me. The lesson here? Don't give up when your original plan doesn't work. Accidental designs can turn out to be even better.
I was frustrated, but I had just spent 2 hours doing all this fine wire weaving so I wasn't about to throw away all my effort (or all that sterling silver wire). I did me best to straighten out the 4 woven sections and then just started to play with them and join them together in a way that the wires wanted to go. The result was a beautiful teardrop shape. I love the gentle curves of these earrings. They're just so elegant! If you like these as much as I do, you can buy the tutorial to make them yourself in the Tutorial Shop. If you'd like a pair but don't want to make them yourself, please feel free to contact me. The lesson here? Don't give up when your original plan doesn't work. Accidental designs can turn out to be even better.
Wednesday, June 13, 2012
New Tutorials
I have a couple new tutorials up for sale. The first is a beginner level wire wrapping tutorial for my Crystal Fan Earrings. You can find it in the Tutorial Shop. To make these you require:
Material List:
- 22.5” 24 gauge dead soft square silver wire.
- 12” 22 gauge half hard half round silver wire.
- 20 4mm crystal bicone beads
- 2 ear wires
- Scotch tape
Tool List:
- Flat nose pliers
- Wire snips
- Ruler
- Round nose pliers
- Half round half flat nose pliers (optional)
- Marker
The second is a intermediate level tutorial for my Embellished Oval Beaded Earrings. This pattern is based on the right angle weave technique. You can find it in the Tutorial Shop. To make this pair of earrings you require:
Material List:
- 246 size 15/0 miyuki delica beads
- 280 size 11/0 miyuki delica beads
- 208 size 10/0 seed beads
- Beading thread
- 2 ear wires
Tool List:
- Beading needle
- Needle nose pliers
Happy beading and wire wrapping!
Material List:
- 22.5” 24 gauge dead soft square silver wire.
- 12” 22 gauge half hard half round silver wire.
- 20 4mm crystal bicone beads
- 2 ear wires
- Scotch tape
Tool List:
- Flat nose pliers
- Wire snips
- Ruler
- Round nose pliers
- Half round half flat nose pliers (optional)
- Marker
The second is a intermediate level tutorial for my Embellished Oval Beaded Earrings. This pattern is based on the right angle weave technique. You can find it in the Tutorial Shop. To make this pair of earrings you require:
Material List:
- 246 size 15/0 miyuki delica beads
- 280 size 11/0 miyuki delica beads
- 208 size 10/0 seed beads
- Beading thread
- 2 ear wires
Tool List:
- Beading needle
- Needle nose pliers
Happy beading and wire wrapping!
Subscribe to:
Posts (Atom)







